open-audiovisual
Search GitHub

Zoom

Zoom R16

Zoom R16 is a MIDI hardware controller by Zoom: 1 encoder, 9 faders and 40 buttons.

It sends CC, Note and Pitch bend on channels 1, 2, 3, 4, 5, 6, 7, 8, 9. The profile cites 1 source. 50 of its controls are marked unverified: the number is our best reading, and Learn rebinds it in one move.

  • Community notes
  • From QLC+
  • Layout generated automatically
  • 50 unverified
Kind
hardware device
Maker
Zoom
Controls
50 controls
Messages
CC · Note · Pitch bend
MIDI channels
1, 2, 3, 4, 5, 6, 7, 8, 9
LED feedback
none sent
Layout
generated automatically
Data licence
Apache-2.0, from QLC+ (NOTICE)
Checked on hardware
not yet
Signals
midi/r16/…
Port name matches
/^zoom\s*r16(_r24)?(\s+(midi|port))*(\s+\d+)?$/i
ZOOM R16FADERSFader 1Fader 2Fader 3Fader 4Fader 5Fader 6Fader 7Fader 8Fader - MaENCODERSSpinwheelBUTTONSF1F2F3F4F5

Play Zoom R16 on screen Raw JSON ↗ All controllers

Layout generated automatically: QLC+ has no faceplate data, so this is a list of the controls, not a picture of the device.

Drag knobs and faders · tap pads and keys · or plug the real one in and press Connect. Nothing is sent anywhere unless you add a MIDI out.

MIDI implementation

Every control of Zoom R16 and the message it sends

Generated from the profile file, so it is the same table the on-screen controller plays. Channels are 1–16; numbers are real MIDI numbers.

MIDI implementation of Zoom R16
ControlTypeMessageChNumberSignalLED feedbackEvidence
Spinwheel spinwheel encoder CC · absolute 1 60 midi/r16/spinwheel — unverified
01-Rec 01-rec button Note · momentary 1 0 · C-1 midi/r16/01-rec — unverified
02-Rec 02-rec button Note · momentary 1 1 · C#-1 midi/r16/02-rec — unverified
03-Rec 03-rec button Note · momentary 1 2 · D-1 midi/r16/03-rec — unverified
04-Rec 04-rec button Note · momentary 1 3 · D#-1 midi/r16/04-rec — unverified
05-Rec 05-rec button Note · momentary 1 4 · E-1 midi/r16/05-rec — unverified
06-Rec 06-rec button Note · momentary 1 5 · F-1 midi/r16/06-rec — unverified
07-Rec 07-rec button Note · momentary 1 6 · F#-1 midi/r16/07-rec — unverified
08-Rec 08-rec button Note · momentary 1 7 · G-1 midi/r16/08-rec — unverified
01-Solo 01-solo button Note · momentary 1 8 · G#-1 midi/r16/01-solo — unverified
02-Solo 02-solo button Note · momentary 1 9 · A-1 midi/r16/02-solo — unverified
03-Solo 03-solo button Note · momentary 1 10 · A#-1 midi/r16/03-solo — unverified
04-Solo 04-solo button Note · momentary 1 11 · B-1 midi/r16/04-solo — unverified
05-Solo 05-solo button Note · momentary 1 12 · C0 midi/r16/05-solo — unverified
06-Solo 06-solo button Note · momentary 1 13 · C#0 midi/r16/06-solo — unverified
07-Solo 07-solo button Note · momentary 1 14 · D0 midi/r16/07-solo — unverified
08-Solo 08-solo button Note · momentary 1 15 · D#0 midi/r16/08-solo — unverified
01-Mute 01-mute button Note · momentary 1 16 · E0 midi/r16/01-mute — unverified
02-Mute 02-mute button Note · momentary 1 17 · F0 midi/r16/02-mute — unverified
03-Mute 03-mute button Note · momentary 1 18 · F#0 midi/r16/03-mute — unverified
04-Mute 04-mute button Note · momentary 1 19 · G0 midi/r16/04-mute — unverified
05-Mute 05-mute button Note · momentary 1 20 · G#0 midi/r16/05-mute — unverified
06-Mute 06-mute button Note · momentary 1 21 · A0 midi/r16/06-mute — unverified
07-Mute 07-mute button Note · momentary 1 22 · A#0 midi/r16/07-mute — unverified
08-Mute 08-mute button Note · momentary 1 23 · B0 midi/r16/08-mute — unverified
1-8Tr 1-8tr button Note · momentary 1 46 · A#2 midi/r16/1-8tr — unverified
9-16Tr 9-16tr button Note · momentary 1 47 · B2 midi/r16/9-16tr — unverified
F1 f1 button Note · momentary 1 54 · F#3 midi/r16/f1 — unverified
F2 f2 button Note · momentary 1 55 · G3 midi/r16/f2 — unverified
F3 f3 button Note · momentary 1 56 · G#3 midi/r16/f3 — unverified
F4 f4 button Note · momentary 1 57 · A3 midi/r16/f4 — unverified
F5 f5 button Note · momentary 1 58 · A#3 midi/r16/f5 — unverified
Recording-Rew recording-rew button Note · momentary 1 91 · G6 midi/r16/recording-rew — unverified
Recording-FF recording-ff button Note · momentary 1 92 · G#6 midi/r16/recording-ff — unverified
Recording-Stop recording-stop button Note · momentary 1 93 · A6 midi/r16/recording-stop — unverified
Recording-Play recording-play button Note · momentary 1 94 · A#6 midi/r16/recording-play — unverified
Recording-Rec recording-rec button Note · momentary 1 95 · B6 midi/r16/recording-rec — unverified
Arrow-Up arrow-up button Note · momentary 1 96 · C7 midi/r16/arrow-up — unverified
Arrow-Down arrow-down button Note · momentary 1 97 · C#7 midi/r16/arrow-down — unverified
Arrow-Left arrow-left button Note · momentary 1 98 · D7 midi/r16/arrow-left — unverified
Arrow-Right arrow-right button Note · momentary 1 99 · D#7 midi/r16/arrow-right — unverified
Fader 1 fader-1 fader Pitch bend 1 0–16383 · centre 8192 midi/r16/fader-1 — unverified
Fader 2 fader-2 fader Pitch bend 2 0–16383 · centre 8192 midi/r16/fader-2 — unverified
Fader 3 fader-3 fader Pitch bend 3 0–16383 · centre 8192 midi/r16/fader-3 — unverified
Fader 4 fader-4 fader Pitch bend 4 0–16383 · centre 8192 midi/r16/fader-4 — unverified
Fader 5 fader-5 fader Pitch bend 5 0–16383 · centre 8192 midi/r16/fader-5 — unverified
Fader 6 fader-6 fader Pitch bend 6 0–16383 · centre 8192 midi/r16/fader-6 — unverified
Fader 7 fader-7 fader Pitch bend 7 0–16383 · centre 8192 midi/r16/fader-7 — unverified
Fader 8 fader-8 fader Pitch bend 8 0–16383 · centre 8192 midi/r16/fader-8 — unverified
Fader - Master fader-master fader Pitch bend 9 0–16383 · centre 8192 midi/r16/fader-master — unverified

Have this unit? It takes a few minutes to check this data. Verify Zoom R16 with your unit →

LED feedback is not modeled for this one yet, so OAV does not light its LEDs. Every control still plays and sends its message.

Sources

Where this profile comes from

Imported from QLC+ on 2026-11-04. resources/inputprofiles/Zoom-R16.qxi

Notes

Imported from QLC+. The messages are what its community profile lists; nobody has checked them on a unit for this project, so every control is unverified. QLC+ has no faceplate data, so the layout was generated from the list of controls and does not look like the device. The port-name pattern was written from the model name, not read from a unit. QLC+ numbers these controls without a MIDI channel, so channel 1 here is a placeholder: the unit may send on another.

Port names it recognises

matches
/^zoom\s*r16(_r24)?(\s+(midi|port))*(\s+\d+)?$/i

Signals

Every control publishes midi/r16/<control> (0..1), plus /raw; pads add /hit, encoders /delta, keys /on /off and n<note>; the last control touched is midi/r16/last.

Use it

Use Zoom R16 in your own work

  1. Embed it with one line

    No import map, no build step. Change layout, add hardware="ask" for a Connect button.

    html
    <script type="module" src="https://openaudiovisual.com/packages/midi/element.js"></script>
    <oav-controller profile="zoom-r16" readout></oav-controller>
  2. Or as an iframe

    For places that only take an iframe. Every event arrives as a postMessage.

    html
    <iframe src="https://openaudiovisual.com/embed/controller/?profile=zoom-r16&readout"
            width="720" height="602" style="border:0;max-width:100%" allow="midi"
            title="Zoom R16"></iframe>
    <script>
      // every control the visitor plays arrives here
      addEventListener('message', (e) => {
        if (e.data?.source !== 'openav' || e.data.type !== 'control') return;
        console.log(e.data.detail.signal, e.data.detail.value);
      });
    </script>
  3. Send it to Ableton, TouchDesigner or Resolume

    What you play on screen leaves as real MIDI on the IAC bus (macOS) or a loopMIDI port (Windows). The steps are on the catalog page.

    html
    <!-- what you play on this controller → the IAC bus (macOS) → Ableton, TouchDesigner, Resolume -->
    <script type="module" src="https://openaudiovisual.com/packages/midi/element.js"></script>
    <oav-controller profile="zoom-r16" midi-out="IAC" readout></oav-controller>
    <!-- Windows: midi-out="loopMIDI" · let the visitor pick a port: midi-out="ask" -->

    macOS: Audio MIDI Setup → MIDI Studio → IAC Driver → “Device is online”. Windows 11: the built-in Windows MIDI Services have a loopback (not tested by us); older Windows: install loopMIDI, add a port and use midi-out="loopMIDI".

In p5.js, with one line

The one-line injection names knobs, faders and pads by their order in this profile, the order of the table above. Add ?profile=zoom-r16 to make the on-screen controller this one; a real Zoom R16 is recognised by its port name.

javascript
document.head.prepend(Object.assign(document.createElement('script'), { src: 'https://openaudiovisual.com/p5/oav-p5.js?profile=zoom-r16' }));
In your sketchControlMessage
fader1Fader 1 fader-1Pitch bend · Ch 1
fader2Fader 2 fader-2Pitch bend · Ch 2
fader3Fader 3 fader-3Pitch bend · Ch 3
fader4Fader 4 fader-4Pitch bend · Ch 4
fader5Fader 5 fader-5Pitch bend · Ch 5
fader6Fader 6 fader-6Pitch bend · Ch 6
fader7Fader 7 fader-7Pitch bend · Ch 7
fader8Fader 8 fader-8Pitch bend · Ch 8
fader(9)Fader - Master fader-masterPitch bend · Ch 9
p5.js sketch
function draw() {
  background(fader1 * 255);   // Fader 1 · note undefined
  circle(width / 2, height / 2, 50 + fader2 * 300);   // Fader 2 · note undefined
}

Encoders, buttons, wheels and strips are not numbered: read them as midi.cc[number] in the table above, or react in controlChange(cc, value, ch).

The whole p5.js page →

Other software

Use this controller outside this project

The same data, as files other programs read. Nobody has tested these on this exact unit unless the table above says so.

QLC+

An input profile: every control and LED value, for lighting. Copy it to your user folder (macOS ~/Library/Application Support/QLC+/InputProfiles, Linux ~/.qlcplus/inputprofiles, Windows %USERPROFILE%\QLC+\InputProfiles) and restart QLC+. Then set the MIDI channel of this input to Omni.

Mixxx

A starting point, not a finished mapping: decks, EQ and hot cues go to the controls in order. Put both files in the folder that Preferences → Controllers → Open User Mapping Folder opens, then remap what you like with the Learning Wizard.

The data itself

Everything above comes from this file: faceplate, messages, LEDs, SysEx and who checked what. tools/export-controller.mjs writes these files from any profile.

Missing

Is your controller not here?

Open an issue with the brand and model, whether you have the unit and a link to the manual. Or write the profile yourself: it is one JSON file.

GitHub

Is something in this data wrong?

Every number on this page comes from one JSON file. If it disagrees with your unit or the manual, tell us which firmware you checked and we fix the file.