Behringer
Behringer LC2412
Behringer LC2412 is a MIDI hardware controller by Behringer: 3 knobs, 30 faders and 21 buttons.
It sends CC on channel 1. The profile cites 1 source. 54 of its controls are marked unverified: the number is our best reading, and Learn rebinds it in one move.
- Community notes
- From QLC+
- Layout generated automatically
- 54 unverified
- Kind
- hardware device
- Maker
- Behringer
- Controls
- 54 controls
- Messages
- CC
- MIDI channels
- 1
- LED feedback
- none sent
- Layout
- generated automatically
- Data licence
- Apache-2.0, from QLC+ (NOTICE)
- Checked on hardware
- not yet
- Signals
midi/lc2412/…- Port name matches
- none: assign by hand, then learn
Layout generated automatically: QLC+ has no faceplate data, so this is a list of the controls, not a picture of the device.
Drag knobs and faders · tap pads and keys · or plug the real one in and press Connect. Nothing is sent anywhere unless you add a MIDI out.
MIDI implementation
Every control of Behringer LC2412 and the message it sends
Generated from the profile file, so it is the same table the on-screen controller plays. Channels are 1–16; numbers are real MIDI numbers.
| Control | Type | Message | Ch | Number | Signal | LED feedback | Evidence |
|---|---|---|---|---|---|---|---|
A Preset Fader 1 a-preset-fader-1 |
fader | CC | 1 | 0 | midi/lc2412/a-preset-fader-1 |
— | unverified |
A Preset Fader 2 a-preset-fader-2 |
fader | CC | 1 | 1 | midi/lc2412/a-preset-fader-2 |
— | unverified |
A Preset Fader 3 a-preset-fader-3 |
fader | CC | 1 | 2 | midi/lc2412/a-preset-fader-3 |
— | unverified |
A Preset Fader 4 a-preset-fader-4 |
fader | CC | 1 | 3 | midi/lc2412/a-preset-fader-4 |
— | unverified |
A Preset Fader 5 a-preset-fader-5 |
fader | CC | 1 | 4 | midi/lc2412/a-preset-fader-5 |
— | unverified |
A Preset Fader 6 a-preset-fader-6 |
fader | CC | 1 | 5 | midi/lc2412/a-preset-fader-6 |
— | unverified |
A Preset Fader 7 a-preset-fader-7 |
fader | CC | 1 | 6 | midi/lc2412/a-preset-fader-7 |
— | unverified |
A Preset Fader 8 a-preset-fader-8 |
fader | CC | 1 | 7 | midi/lc2412/a-preset-fader-8 |
— | unverified |
A Preset Fader 9 a-preset-fader-9 |
fader | CC | 1 | 8 | midi/lc2412/a-preset-fader-9 |
— | unverified |
A Preset Fader 10 a-preset-fader-10 |
fader | CC | 1 | 9 | midi/lc2412/a-preset-fader-10 |
— | unverified |
A Preset Fader 11 a-preset-fader-11 |
fader | CC | 1 | 10 | midi/lc2412/a-preset-fader-11 |
— | unverified |
A Preset Fader 12 a-preset-fader-12 |
fader | CC | 1 | 11 | midi/lc2412/a-preset-fader-12 |
— | unverified |
B Memory Fader 1 b-memory-fader-1 |
fader | CC | 1 | 12 | midi/lc2412/b-memory-fader-1 |
— | unverified |
B Memory Fader 2 b-memory-fader-2 |
fader | CC | 1 | 13 | midi/lc2412/b-memory-fader-2 |
— | unverified |
B Memory Fader 3 b-memory-fader-3 |
fader | CC | 1 | 14 | midi/lc2412/b-memory-fader-3 |
— | unverified |
B Memory Fader 4 b-memory-fader-4 |
fader | CC | 1 | 15 | midi/lc2412/b-memory-fader-4 |
— | unverified |
B Memory Fader 5 b-memory-fader-5 |
fader | CC | 1 | 16 | midi/lc2412/b-memory-fader-5 |
— | unverified |
B Memory Fader 6 b-memory-fader-6 |
fader | CC | 1 | 17 | midi/lc2412/b-memory-fader-6 |
— | unverified |
B Memory Fader 7 b-memory-fader-7 |
fader | CC | 1 | 18 | midi/lc2412/b-memory-fader-7 |
— | unverified |
B Memory Fader 8 b-memory-fader-8 |
fader | CC | 1 | 19 | midi/lc2412/b-memory-fader-8 |
— | unverified |
B Memory Fader 9 b-memory-fader-9 |
fader | CC | 1 | 20 | midi/lc2412/b-memory-fader-9 |
— | unverified |
B Memory Fader 10 b-memory-fader-10 |
fader | CC | 1 | 21 | midi/lc2412/b-memory-fader-10 |
— | unverified |
B Memory Fader 11 b-memory-fader-11 |
fader | CC | 1 | 22 | midi/lc2412/b-memory-fader-11 |
— | unverified |
B Memory Fader 12 b-memory-fader-12 |
fader | CC | 1 | 23 | midi/lc2412/b-memory-fader-12 |
— | unverified |
Speed speed |
fader | CC | 1 | 24 | midi/lc2412/speed |
— | unverified |
X-Fade x-fade |
fader | CC | 1 | 25 | midi/lc2412/x-fade |
— | unverified |
Chaser chaser |
fader | CC | 1 | 26 | midi/lc2412/chaser |
— | unverified |
Main main |
fader | CC | 1 | 27 | midi/lc2412/main |
— | unverified |
Main A main-a |
fader | CC | 1 | 28 | midi/lc2412/main-a |
— | unverified |
Main B main-b |
fader | CC | 1 | 29 | midi/lc2412/main-b |
— | unverified |
Key Step key-step |
button | CC · momentary | 1 | 30 | midi/lc2412/key-step |
— | unverified |
Key Flash 1 key-flash-1 |
button | CC · momentary | 1 | 31 | midi/lc2412/key-flash-1 |
— | unverified |
Key Flash 2 key-flash-2 |
button | CC · momentary | 1 | 32 | midi/lc2412/key-flash-2 |
— | unverified |
Key Flash 3 key-flash-3 |
button | CC · momentary | 1 | 33 | midi/lc2412/key-flash-3 |
— | unverified |
Key Flash 4 key-flash-4 |
button | CC · momentary | 1 | 34 | midi/lc2412/key-flash-4 |
— | unverified |
Key Flash 5 key-flash-5 |
button | CC · momentary | 1 | 35 | midi/lc2412/key-flash-5 |
— | unverified |
Key Flash 6 key-flash-6 |
button | CC · momentary | 1 | 36 | midi/lc2412/key-flash-6 |
— | unverified |
Key Flash 7 key-flash-7 |
button | CC · momentary | 1 | 37 | midi/lc2412/key-flash-7 |
— | unverified |
Key Flash 8 key-flash-8 |
button | CC · momentary | 1 | 38 | midi/lc2412/key-flash-8 |
— | unverified |
Key Flash 9 key-flash-9 |
button | CC · momentary | 1 | 39 | midi/lc2412/key-flash-9 |
— | unverified |
Key Flash 10 key-flash-10 |
button | CC · momentary | 1 | 40 | midi/lc2412/key-flash-10 |
— | unverified |
Key Flash 11 key-flash-11 |
button | CC · momentary | 1 | 41 | midi/lc2412/key-flash-11 |
— | unverified |
Key Flash 12 key-flash-12 |
button | CC · momentary | 1 | 42 | midi/lc2412/key-flash-12 |
— | unverified |
Bank bank |
knob | CC | 1 | 43 | midi/lc2412/bank |
— | unverified |
Chaser Number chaser-number |
knob | CC | 1 | 44 | midi/lc2412/chaser-number |
— | unverified |
Key Channel Flash key-channel-flash |
button | CC · momentary | 1 | 45 | midi/lc2412/key-channel-flash |
— | unverified |
Key Solo key-solo |
button | CC · momentary | 1 | 46 | midi/lc2412/key-solo |
— | unverified |
Special 1 special-1 |
button | CC · momentary | 1 | 47 | midi/lc2412/special-1 |
— | unverified |
Special 2 special-2 |
button | CC · momentary | 1 | 48 | midi/lc2412/special-2 |
— | unverified |
Key Manual key-manual |
button | CC · momentary | 1 | 49 | midi/lc2412/key-manual |
— | unverified |
Sound/Run sound-run |
knob | CC | 1 | 50 | midi/lc2412/sound-run |
— | unverified |
Insert insert |
button | CC · momentary | 1 | 51 | midi/lc2412/insert |
— | unverified |
Key Preset key-preset |
button | CC · momentary | 1 | 52 | midi/lc2412/key-preset |
— | unverified |
Key Memory key-memory |
button | CC · momentary | 1 | 53 | midi/lc2412/key-memory |
— | unverified |
Have this unit? It takes a few minutes to check this data. Verify Behringer LC2412 with your unit →
LED feedback is not modeled for this one yet, so OAV does not light its LEDs. Every control still plays and sends its message.
Sources
- community QLC+ input profile Behringer-LC2412.qxi (non-official)community profile by Heikki Junnila; Apache-2.0; numbers read from QLC+ channel numbers, not checked by this project
Where this profile comes from
Imported from QLC+ on 2026-11-04. resources/inputprofiles/Behringer-LC2412.qxi
Notes
Imported from QLC+. The messages are what its community profile lists; nobody has checked them on a unit for this project, so every control is unverified. QLC+ has no faceplate data, so the layout was generated from the list of controls and does not look like the device. There is no port name to go by, so it is never picked automatically: assign it by hand. QLC+ numbers these controls without a MIDI channel, so channel 1 here is a placeholder: the unit may send on another.
Port names it recognises
Signals
Every control publishes midi/lc2412/<control> (0..1), plus /raw; pads add /hit, encoders /delta, keys /on /off and n<note>; the last control touched is midi/lc2412/last.
Use it
Use Behringer LC2412 in your own work
Embed it with one line
No import map, no build step. Change
layout, addhardware="ask"for a Connect button.<script type="module" src="https://openaudiovisual.com/packages/midi/element.js"></script> <oav-controller profile="behringer-lc2412" readout></oav-controller>Or as an iframe
For places that only take an iframe. Every event arrives as a
postMessage.<iframe src="https://openaudiovisual.com/embed/controller/?profile=behringer-lc2412&readout" width="720" height="742" style="border:0;max-width:100%" allow="midi" title="Behringer LC2412"></iframe> <script> // every control the visitor plays arrives here addEventListener('message', (e) => { if (e.data?.source !== 'openav' || e.data.type !== 'control') return; console.log(e.data.detail.signal, e.data.detail.value); }); </script>Send it to Ableton, TouchDesigner or Resolume
What you play on screen leaves as real MIDI on the IAC bus (macOS) or a loopMIDI port (Windows). The steps are on the catalog page.
<!-- what you play on this controller → the IAC bus (macOS) → Ableton, TouchDesigner, Resolume --> <script type="module" src="https://openaudiovisual.com/packages/midi/element.js"></script> <oav-controller profile="behringer-lc2412" midi-out="IAC" readout></oav-controller> <!-- Windows: midi-out="loopMIDI" · let the visitor pick a port: midi-out="ask" -->macOS: Audio MIDI Setup → MIDI Studio → IAC Driver → “Device is online”. Windows 11: the built-in Windows MIDI Services have a loopback (not tested by us); older Windows: install loopMIDI, add a port and use
midi-out="loopMIDI".
In p5.js, with one line
The one-line injection names knobs, faders and pads by their order in this profile, the order of the table above. Add ?profile=behringer-lc2412 to make the on-screen controller this one; a real Behringer LC2412 is recognised by its port name.
document.head.prepend(Object.assign(document.createElement('script'), { src: 'https://openaudiovisual.com/p5/oav-p5.js?profile=behringer-lc2412' }));| In your sketch | Control | Message |
|---|---|---|
knob1 | Bank bank | CC 43 · Ch 1 |
knob2 | Chaser Number chaser-number | CC 44 · Ch 1 |
knob3 | Sound/Run sound-run | CC 50 · Ch 1 |
fader1 | A Preset Fader 1 a-preset-fader-1 | CC 0 · Ch 1 |
fader2 | A Preset Fader 2 a-preset-fader-2 | CC 1 · Ch 1 |
fader3 | A Preset Fader 3 a-preset-fader-3 | CC 2 · Ch 1 |
fader4 | A Preset Fader 4 a-preset-fader-4 | CC 3 · Ch 1 |
fader5 | A Preset Fader 5 a-preset-fader-5 | CC 4 · Ch 1 |
fader6 | A Preset Fader 6 a-preset-fader-6 | CC 5 · Ch 1 |
fader7 | A Preset Fader 7 a-preset-fader-7 | CC 6 · Ch 1 |
fader8 | A Preset Fader 8 a-preset-fader-8 | CC 7 · Ch 1 |
fader(9) | A Preset Fader 9 a-preset-fader-9 | CC 8 · Ch 1 |
fader(10) | A Preset Fader 10 a-preset-fader-10 | CC 9 · Ch 1 |
fader(11) | A Preset Fader 11 a-preset-fader-11 | CC 10 · Ch 1 |
fader(12) | A Preset Fader 12 a-preset-fader-12 | CC 11 · Ch 1 |
fader(13) | B Memory Fader 1 b-memory-fader-1 | CC 12 · Ch 1 |
fader(14) | B Memory Fader 2 b-memory-fader-2 | CC 13 · Ch 1 |
fader(15) | B Memory Fader 3 b-memory-fader-3 | CC 14 · Ch 1 |
fader(16) | B Memory Fader 4 b-memory-fader-4 | CC 15 · Ch 1 |
… and 14 more, up to fader(30), in the same order | ||
function draw() {
background(knob1 * 255); // Bank · CC 43
circle(width / 2, height / 2, 50 + knob2 * 300); // Chaser Number · CC 44
}Encoders, buttons, wheels and strips are not numbered: read them as midi.cc[number] in the table above, or react in controlChange(cc, value, ch).
Other software
Use this controller outside this project
The same data, as files other programs read. Nobody has tested these on this exact unit unless the table above says so.
QLC+
An input profile: every control and LED value, for lighting. Copy it to your user folder (macOS ~/Library/Application Support/QLC+/InputProfiles, Linux ~/.qlcplus/inputprofiles, Windows %USERPROFILE%\QLC+\InputProfiles) and restart QLC+.
Mixxx
A starting point, not a finished mapping: decks, EQ and hot cues go to the controls in order. Put both files in the folder that Preferences → Controllers → Open User Mapping Folder opens, then remap what you like with the Learning Wizard.
The data itself
Everything above comes from this file: faceplate, messages, LEDs, SysEx and who checked what. tools/export-controller.mjs writes these files from any profile.
Missing
Is your controller not here?
Open an issue with the brand and model, whether you have the unit and a link to the manual. Or write the profile yourself: it is one JSON file.
GitHub
Is something in this data wrong?
Every number on this page comes from one JSON file. If it disagrees with your unit or the manual, tell us which firmware you checked and we fix the file.